- 2 x 90 Degree 28mm Elbow Connectors
- 1 x 28mm Tee Connector
- 1 x 300mm 28mm Hard Waste Pipe
To assemble the kit:
- Place one elbow and one tee in front of your waste outlets and mark the waste pipe for correct spacing.
- Cut your waste pipe accordingly.
- Insert the pipe into one elbow and the tee at the other end of the same pipe
- Insert the next piece of pipe into the other side of the tee
- Finally, insert your second elbow onto the other end of the tee. Make sure the elbow is turned 90 degrees from the tee and other elbow so that when you plug this into the outlets, one elbow will not be facing the caravan.
- Now you can use your hose to connect the end elbow to your waste tank.
For caravans with 3 waste outlets:
Simply purchase an extra tee intersection (you will have enough hard pipe) and refer back to step 3-4 by inserting two tees instead of one.